800Watt 12V DC to 110V 120V Power Inverter with Remote Control Dual AC Outlets O59922
800Watt 12V DC to 110V 120V Power Inverter with Remote Control Dual AC Outlets O59922
Provides 800watt pure sine wave power, 1600watt surge power inverter, single phase,convering DC 12 volt to AC 110~120 volt with 2 AC outlets and patient customer after-service,one year Warranty
With Remote Controller: Easy to switch the inverter ON/OFF remotely with a 16.4 feet cable. LED display, allow to monitor battery voltage and AC output voltage in real time
Intelligent Cooling System with 60*60mm powerful fan : provide your powerful airflow, promoting air circulation .Built in Large area aluminum alloy radiator for maximum cooling efficiency,keep your loads running at full potntial without any drops
PROTECTIONS: overload, over temp, high voltage, low voltage, short circuit, internally fused, low and high voltage alarm, cooling fan, and isolated ground neutral
WHAT YOU GET-1x 800W Pure Sine Inverter, 1x User Manual, one Set of Battery Cables(1xRed,1xBlack), 1x remote control
Features:
1.Low no load current draw in standby mode. Accurate LED Display of input DC voltage and output AC voltage.
2. Real pure Sine Wave Inverter, can power up Sensitive Electronics, maintain solid good energy
Solar power inverter, for solar system use with solar panel , solar charge controller and battery bank.
Keep up with load demands in normal use. Can work 24/7 off grid power for home power supply.
Silent operation, not noisy, intelligent control of the fan working. Inverter details:
DC input: 12V
DC input range: 10V-15V
No Load Current Draw: 1A
Efficiency:85%-90%
AC output: 120V
AC Regulation:3%
Frequency: 60Hz
Socket:15a USA type Low Voltage Alarm:9.5V-10.5V
Low Voltage Shut Down: 9V-10V
Over Load: shut off, recover manually
Over Voltage Shut Down:15.5V
Over Thermal: Shut Off Output Automatically, Over voltage protection
Cooling Ways: Cooling Fan will run when the temperature is over 50 degree
Precautions:
1. Please use the standard battery cables we sent, or a full power output may not be guaranteed.
2. Please do not connect the inverter with the grid power, and a reverse connection of positive and negative is also forbidden.
3. Please do not overload. If your applications are inductive loads, please choose the inverters whose continuous power is 3-7 times higher than the watts of your appliances.
4. Please turn off the load first then turn off the inverter. And as there is a soft start function, please turn on the inverter first then turn on your loads, or the output may not stable at the first seconds.
Automotive Tools & Equipment Jump Starters, Battery Chargers & Portable Power